internal mixer
英 [ɪnˈtɜːnl ˈmɪksə(r)]
美 [ɪnˈtɜːrnl ˈmɪksər]
（橡胶）密（闭式）炼（胶）机
双语例句
- The rubber-mixing quality and efficiency of the internal mixer can be increased.
本实用新型可以提高密炼机炼胶的质量和效率。 - The blends of bisphenol-Ap-azo polyester ( p-PBAZO) and polycarbonate ( PC) were prepared through melt-mixing transesterification reaction in the internal mixer.
将双酚A型对位偶氮聚酯（p-PBAZO）和聚碳酸酯（PC）进行熔融共混，并使其发生酯交换反应，制备了p-PBAZO/PC共混物。 - Therefore, the study on new types of synchronous internal mixer and those of rotors will be of theoretical and practical value.
因此，开展对新型同步转子密炼机的研究实际上就是对新型同步转子的研究。 - Numerical Simulation Study on the Blending Process of Two Polymer Melts in Haake Internal Mixer
Haake混合器中双组分聚合物熔体共混过程的数值模拟研究 - The Internal Mixer Inferential Control System
密炼机的推断控制系统 - The technical advances in up-stream equipment of internal mixer, including the conveyor system for powder, the automatic weighing system for carbon black, oils and compound, computer control system for milling, and the weighing system for small powders, were introduced.
简述密炼机上辅机粉料输送系统，炭黑、油料和胶料自动称量系统，计算机自动控制和小粉料称量系统的技术进展。 - Automatic Control for Mix Quality Fluctuation in Mixing Process with Internal Mixer
自动控制密炼机混炼过程胶料质量的波动 - A new physical significance of power graph in rubber mixing process was given based on the rheological theories in internal mixer and in rubber mixing.
根据密炼机流变理论和橡胶混炼流变理论，赋予混炼过程功率曲线新的物理意义。 - The comparative tests of the pinrotor with conventional two blade rotor in a domestic internal mixer were reported.
本文介绍了在国产密炼机上采用销钉转子和普通二棱转子进行对比试验的情况。 - One vibration internal mixer is introduced.
介绍了振动共混转矩流变仪。 - The Internal Mixer Inferential Control System Design for Densification Machine of Insulation Board
密炼机的推断控制系统绝缘纸板密化机的设计 - Study of The Pin Rotor in An Internal Mixer
密炼机销钉转子的试验研究 - The essence of the instantaneous power control in internal mixer is to control the viscosity of mixing material.
密炼机瞬时功率控制的实质是控制混炼物料的粘度。 - The Effect of Filled Coefficient of Internal Mixer on Mixing Process
密炼机的填充系统对混炼过程的影响 - This is because the performance of the internal mixer is related to the quality of mixed stock, and also to the performance and longevity of production.
因为密炼机性能的好坏直接影响到混炼胶的质量，也关联着制品的使用性能和寿命。同步转子密炼机正是针对这一需要而研制的。 - Application of Computers in the Designing of Internal Mixer Rotor
计算机在密炼机转子设计中的应用 - There are many mixing equipments being used in polymer processing. The internal mixer is one of the most popular batch mixing equipments.
在聚合物加工的混炼设备中，密炼机是应用最为广泛和间歇式混炼设备。 - In this paper, the selection of optimal filled coefficient of internal mixer and its effect on mixing process are discussed.
主要论述了密炼机最佳填充系数的概念及如何选择问题，重点分析了填充系数对混炼过程的影响。 - Based on the summary and analysis of experiences for the rotors design, the mathematical model and corresponding design method of shear rotor were optimized, and a Delphi program for optimal design of shear rotor for internal mixer was edited.
在分析和总结传统转子设计经验的基础上，优化了剪切型密炼机转子的设计数学模型及相应的设计方法，编制了相应的Delphi优化设计程序。 - Optimal design of internal mixer rotors
密炼机转子的优化设计 - This paper first analyzed one of the key factors-rotor speed of internal mixer which affected the process of the mixing, and then discussed the affection of the rotor speed of internal mixer on the consumption of power by the experiment data.
对影响密炼机混炼过程的关键因素之一&转子转速进行了分析，通过实验数据对转子转速对密炼机功率消耗影响进行了探讨。 - Varied Rotor Clearance Mixer was a new type mixing equipment, which had both internal mixer's and mill's advantages.
调距式密炼机是一种新型混炼设备，它具有密炼机和开炼机的优点。 - A introduction was made on meaning and application of three dimensional modeling design of internal mixer rotors. And the principle and method of its surface modeling design were described, too. A Simple explanation for calculation of the mixer bulk, the rotor volume.
介绍了密炼机转子三维造型设计的意义和用途，重点描述了转子表面模型造型设计的原理和方法，同时还对密炼机容量，转子体积、强度和刚度计算作了简单的说明。 - The development of mixing facilities has experienced about three steps: roll mill, internal mixer and continuous mixer.
混炼设备的发展经历了大致三个阶段：开炼机，密炼机和连续混炼机。 - The hydraulic system of the internal mixer is divided into three parts after analyzing it densely, they are the control part of up spigot, the control part of down spigot and pin, and the control part of feeding gate.
通过对密炼机液压系统的分析，将其分为三个部分，上顶栓控制部分、下顶栓及销锁控制部分和进料门控制部分。 - So it could be used for controlling and supervising the mixing process in internal mixer.
因而瞬时功率控制法可监控生产过程，为密炼机混炼工艺的智能控制奠定了基础。 - Batch internal mixer is still the essential installation in rubber manufacturing production since it was invented in early 19th.
橡胶密炼机自十九世纪初发明以来，一直作为橡胶工业生产中的关键设备而投入使用。 - The rotor structure is a major factor affecting the mixing characteristics of the internal mixer.
密炼机转子结构是影响其混炼特性的主要因素。 - In the cylindrical coordinate, the author had established the physical and mathematical model of short fiber-rubber composite material moving in the shearing-meshing rotors internal mixer.
在柱坐标系下，建立了短纤维-橡胶复合材料在剪切啮合型转子密炼机中运动的物理和数学模型。 - Then, PPG-STF toughened PP ( PP/ PPG-STF) was prepared via melt blending of PPG-STF with PP in an internal mixer. The mechanical properties, rheological properties and crystallization behavior of PP/ PPG-STF were investigated.
然后，采用密炼机将PPG-STF与PP进行熔融共混，制备了剪切增稠流体增韧聚丙烯（PP/PPG-STF），研究了PPG-STF对PP/PPG-STF力学性能、结晶性能等方面的影响。